Electrically Conductive Flooring Tile | Astro EC | Iron Gray | 610 x 610 mm x 2 mm

Electrostatic Conductive Floor Tile Astro EC Iron Gray 610 x 610 mm x 2 mm Antistatic ESD Rubber Floor Covering
ESD

Electrostatic Conductive Floor Tile | Astro EC | Iron Gray | 610 x 610 mm x 2 mm

860-2466.EC.6056.T
Brand

346,28 € exc tax
* For orders below 500 € a processing fee of 150 € will be charged
Packaging Unit :

  Tell A Friend

Also available

[ Colour - Color ]

RUBBER FLOOR COVERINGS | Noraplan Astro EC

Rubber flooring electrostatically conductive "EC" for optimum ESD protection of electronic devices and equipment. Suitable for areas with a risk of explosion.

KEY FEATURES

* Free of PVC, phthalate plasticizers and halogens
* Increased safety thanks to high fire-retardant properties
* Also suitable for raised floor elements 600 x 600 mm
* No coatings needed

INSTALLATION & MAINTENANCE

INSTALLATION
Successful rubber floor installation is a combination of high-quality floor covering, proper subfloor preparation and skillful workmanship. Nora installation guides provide all the information you need to help ensure that your rubber floor installation will look great and perform well for years to come.

CARE
Your AES rubber flooring requires no finishing, waxing or sealing. All AES floor coverings have a dense, nonporous and dirt-repellant surface—eliminating the need to use unfriendly, harsh cleaning chemicals. Understanding how to properly clean and maintain your new rubber floor, even by using just water, will help you keep it looking attractive for years to come.

Profile connection dimension: A + U.
Model
Noraplan Astro EC
Floor Category
Antistatic ESD Rubber Floor Covering
Floor Type
Floor Tile
Conductive / Dissipative
Electrostatically conductive
Colour
Iron Gray
Fire Behavior
Cfl-s1
Resistance to EPA earth Test Method
ESD STM 7.1 / IEC 61 340-4-1
Resistance to EPA earth Requirements
10⁶ – 9 x 10⁷Ohm (Measuring the installed floorat 23 °C (± 2 °C) and ≥ 25 % r.h.) 10⁶ – 10⁹Ohm*** (Measuring the installed floorat 23 °C (± 2 °C) and < 25 % r.h., installed on an appropriate subfloorbuild up. The used adhesive has to have a permanent resistance of R < 3 x 105 Ohm according to EN 13 415. If extremely low humidity values (< 25 % relative air humidity (= r.h.)) are expected for a longer period)
Resistance To EPA Earth Electrical Behaviour/Result
< 10⁶ Ohm
Resistance To Ground Test Method
ESD STM 97. I / IEC 61 340-4-5
Resistance To Ground Requirements
For the system fl‚oor/conductive footwear (R < 5 x 106 Ohm) measuring the installed floorat 23 °C (± 2 °C) and ≥ 25 % r.h.
Resistance To Ground Electrical Behaviour/Result
< 3.5 x 10⁷ · Ohm
Resistance to earth Test Method
EN 1081
Resistance To Earth Electrical Behaviour/Result
10⁶ – 9 x 10⁷Ohm
Electrical behaviour Conductivity resistance
ec = ≤ 106 Ohm
Insulation resistance Test method
VDE 0100 - 600
Insulation Resistance Electrical Behaviour
no result
Charging Voltage Test method
ESD STM 97.2 / IEC 61 340-4-5
Charging Voltage Requirements
Tested with deflned conductive footwear with 23 °C and 12 % r.h.
Charging Voltage Electrical Behaviour
< 10 V
Requirements
ed = ≤ 109 Ohm ec = ≤ 106 Ohm
Thickness
2 mm
Dimensions
610 x 610 mm

All ESD products fulfill the IEC 61340 standards.
We believe all the information in these pages including technical data to be reliable. However we make no warranties expressed or implied and assume no liability regarding any use of this information.


سیستم همکاری در فروش کانال پروکسی تلگرام ژل تاخیری اسپری تاخیری کاندوم اسپری تاخیری ایموشن کانال تلگرام proxy for telegram کسب درآمد کانال پروکسی تلگرام خرید کتاب سیستم های همکاری در فروش کانال تلگرام کانال سک30در تلگرام کسب درآمد از اینترنت خرید پروکسی تلگرام