2 Filter configurations (filter set-up's) available:
• ISO-7 (Class 10.000): German “M” class melt blown filter bag M8-MT-850/ M8-MT-851 + HEPA H14 motor filter M8-MT-853 + HEPA H14 M8-MT-857 ESD exit filter.
• ISO-4 (Class 10): German “M” class melt blown filter bag M8-MT-850/ M8-MT-851 + HEPA H14 motor filter M8-MT-853 + ULPA U15 M8-MT-858 ESD exit filter.
Truly versatile ESD EPA vacuum cleaner / blower with advanced cleanroom Hi-filtration system for industrial contract cleaning and hard to reach dust & debris from ESD sensitive electronic equipment, assembly lines, R&D area's and in field-service.
ESD vacuum cleaner type 888 Muntz BlowVac (Filter set-up IEC / EN 60335-2-69 in annex AA German M Class meltblown filterbag + HEPA H14 motorfilter + HEPA H14 air exit filter).
MUNTZ EPA BlowVac's and ESD vacuum/blower attachment are designed to drain picked up static discharges in a controlled ESD safe manner to earth.
Appliance therefore must be plugged into an appropriately earthed power outlet.
BlowVac cordset: 220-240V 50/60 Hz EPA vacuums are standard supplied with either:
A) 3 Metre cordset with moulded two-pin SCHUKO plug with side + pin hole earthing.
B) 3 Metre cordset with moulded fused 3-pin UK plug.
All 888 GS EPA/CR ESD vacuum cleaner BlowVac' versions also are available in export versions with no MOQ:
* 100V (Japan);
* 120V (Americas);
* 245V (AUS/NZ).
Delivery: Ex. Works Germany packed for export.
All itmes normally available on stock
Guarantee: 18 Months guarantee against poor workmanship and materials defects. Guarantee is limited to free replacement or repair (at our discretion). Damage as a result of inappropriate use (i.e. use in stride with instruction manual) or a drop are excluded from guarantee. Parts subjected to wear and tear are excluded from guarantee.
|Manufactured in The Netherlands to European Community|
|= EPA = Electrostatic Protected Area, only permitting use totally ESD safe materials and production aids to fully protect ESD sensitive electronics against harmful electrostatic discharges.|
|When using an electrical appliance, basic precautions should always be followed, including the following:|
|*||When cleaning or servicing equipment, make sure it itself is switched-OFF and unplugged from outlet.|
|*||Switch off appliance with ON-OFF switch only. Appliance is made for indoor use, must be stored in a dry place and may not be operated under wet conditions or on wet floors/surfaces. Never touch the appliance or the plug with wet hands.|
|*||This appliance is not designed, nor suitable to collect liquids.|
|*||pull or carry the appliance by cord, use cord as a handle, close a door on cord or pull cord around sharp edges or corners. Keep cord away from hot surfaces. Never use appliance with damaged cord or plug. Never leave appliance plugged-in when left unattended.|
|*||If the appliance is not operating properly, has been damaged, left outdoors or dropped in water, contact your supplier and return unit.|
|*||Never use appliance if suction is blocked, with completely restricted airflow or blocked air exit.|
|*||allow children to operate this appliance. It is not a toy !|
|*||Keep hair, fingers, body parts, loose clothing and all foreign object(s) away from openings and moving parts.look into air inlet or exit with running motor !|
|*||operate appliance near flammable or combustible liquids or fumes. collect anything that is hot, smoking or burning. Do not pick up burning cigarettes, hot ashes or matches.|
|*||Never use appliance without a filter bag and motor-/exit filters in place. Never re-use filter bags !|
|*||Repairs must only be performed by an authorized service agent in accordance with national and local safety regulations. Repairs by unqualified persons could be dangerous. The manufacturer cannot be held responsible for unauthorized work.|