Limited electrically conductive and antistatic floors Noraplan signa ed Roll 1,22 x 15 m 2,0 mm

Limited Electrically Conductive Floors Antistatic Noraplan Signa ED 2780 Roll 1,22 x 15 m 2,0 mm - 860-1390.ED.2780.R
ESD

Limited electrically conductive and antistatic floors Noraplan signa ed Roll 1,22 x 15 m 2,0 mm

860-1390.ed.2780.R
Brand

831,37 € exc tax

  Tell A Friend

Also available

[ Color ]

Limited electrically conductive and antistatic floors

Conductive Flooring,
Protect against electrical shock
Electrostatically Limited Conductive ed€ floorings for optimum ESD protection of electronic devices and equipment. Protect against electrical shock, resist most oils and greases. nora® profile connection dimension: A + U Please note: noraplan® ed floorings must be treated with the nora® joint-sealing compound.
Model
_
Type symbol
ed
Product name
Noraplan signa ed
Type
Electrostatically conductive
Resistance to EPA earth Test Method
ESD STM 7.1 / IEC 61 340-4-1
Resistance to EPA earth Requirements
10⁶ – 9 x 10⁷ Ohm (Measuring the installed floor at 23 °C (± 2 °C) and ≥ 25 % r.h.) 10⁶ – 10⁹ Ohm*** (Measuring the installed floor at 23 °C (± 2 °C) and < 25 % r.h.. installed on an appropriate subfloor build
Resistance to EPA earth Electrical behaviour / result
10⁶ – 9 x 10⁷ Ohm
Operator system – Resistance to ground Test Method
ESD STM 97. I / IEC 61 340-4-5
Operator system – Resistance to ground Requirements
For the system floor/conductive footwear (R < 5 x 106 Ohm) measuring the installed floor at 23 °C (± 2 °C) and ≥ 25 % r.h.
Operator system – Resistance to ground Electrical behaviour / result
≤ 3.5 x 10⁷ Ohm
Resistance to earth Test Method
EN 1081
Resistance to earth Requirements
not specified
Resistance to earth Electrical behaviour / result
10⁶ – 9 x 10⁷ Ohm
Electrical behaviour Conductivity resistance
ed = ≤ 109 Ohm
Insulation resistance Test method
VDE 0100 - 600
Insulation resistance Requirements
not specified
Insulation resistance Electrical behaviour / result
≥ 5 x 10⁴ Ohm
Body voltage generation / Charging voltage Test method
ESD STM 97.2 / IEC 61 340-4-5
Body voltage generation / Charging voltage Requirements
Tested with defined conductive footwear with 23 °C and 12 % r.h.
Body voltage generation / Charging voltage Electrical behaviour / result
< 10 V
Requirements
ed = ≤ 109 Ohm ec = ≤ 106 Ohm
Color
2780
Unit
1
Size
1.22 x 15 m
Thickness
2.0 mm
Execution
Roll
per doos
1

All ESD products fulfill the IEC 61340 standards.
We believe all the information in these pages including technical data to be reliable. However we make no warranties expressed or implied and assume no liability regarding any use of this information.


سیستم همکاری در فروش کانال تلگرام کانال پروکسی تلگرام کانال پروکسی تلگرام فروشگاه اینترنتی کانال پروکسی تلگرام proxy for telegram
ژل تاخیری
اسپری تاخیری
کاندوم ژل لوبریکانت کسب درآمد خرید کتاب سیستم های همکاری در فروش کسب درآمد کانال تلگرام کانال سک30در تلگرام