Electrically Conductive Flooring tile Noraplan astro ec Tile 610 x 610 mm 2,0 mm

Electrically Conductive Flooring tile Noraplan astro ec  Tile 610 x 610 mm 2,0 mm
ESD

Electrically Conductive Flooring tile Noraplan astro ec Tile 610 x 610 mm 2,0 mm

860-2466.ec.6114.T
Brand

73,42 € exc tax

  Tell A Friend

Also available

[ Color ]

Electrically Conductive Flooring tile

Conductive Flooring,
also suitable for raised floor elements 600 x 600 mm
Electrostatically conductive “ec” floorings for optimum ESD protection of electronic devices and equipment. Suitable for areas with a risk of explosions and fork-lift-truck areas (norament® 927 grano ec). Largely resistant to acids and alkalis (norament® 927 grano ec). nora® profile connection dimension: A + U
Model
_
Type symbol
ec
Product name
Noraplan astro ec
Type
Electrostatically conductive
Resistance to EPA earth Test Method
ESD STM 7.1 / IEC 61 340-4-1
Resistance to EPA earth Requirements
10⁶ – 9 x 10⁷ Ohm (Measuring the installed floor at 23 °C (± 2 °C) and ≥ 25 % r.h.) 10⁶ – 10⁹ Ohm*** (Measuring the installed floor at 23 °C (± 2 °C) and < 25 % r.h.. installed on an appropriate subfloor build
Resistance to EPA earth Electrical behaviour / result
< 10⁶ Ohm
Operator system – Resistance to ground Test Method
ESD STM 97. I / IEC 61 340-4-5
Operator system – Resistance to ground Requirements
For the system floor/conductive footwear (R < 5 x 106 Ohm) measuring the installed floor at 23 °C (± 2 °C) and ≥ 25 % r.h.
Operator system – Resistance to ground Electrical behaviour / result
< 3.5 x 10⁷ Ohm
Resistance to earth Test Method
EN 1081
Resistance to earth Requirements
not specified
Resistance to earth Electrical behaviour / result
10⁶ – 9 x 10⁷ Ohm
Electrical behaviour Conductivity resistance
ec = ≤ 106 Ohm
Insulation resistance Test method
VDE 0100 - 600
Insulation resistance Requirements
not specified
Insulation resistance Electrical behaviour / result
no result
Body voltage generation / Charging voltage Test method
ESD STM 97.2 / IEC 61 340-4-5
Body voltage generation / Charging voltage Requirements
Tested with defined conductive footwear with 23 °C and 12 % r.h.
Body voltage generation / Charging voltage Electrical behaviour / result
< 10 V
Requirements
ed = ≤ 109 Ohm ec = ≤ 106 Ohm
Color
6114
Unit
1
Size
610 x 610 mm
Thickness
2.0 mm
Execution
Tile
per doos
15

All ESD products fulfill the IEC 61340 standards.
We believe all the information in these pages including technical data to be reliable. However we make no warranties expressed or implied and assume no liability regarding any use of this information.