ESD Workspace Analysis EPA-ESD Protected Area Internal Quality ESD Audits

ESD Workspace Analysis AES

ESD Workspace Analysis AES

HS Code : Service

Packaging Unit :

  Tell A Friend

ESD Workspace Analysis EPA-ESD Protected Area Internal Quality ESD Audits. Make sure your EPA - ESD Protected Area is ESD safe and complies with the guidelines outlined in the international ESD standardization IEC61340. Set the correct ESD guidelines performing internal quality ESD audits, make sure your ESD products are ESD safe, Implement them in a correct way, educate your employees and suppliers, be consquent, make no exception,. Only the right ESD products implanted properly ensure you a thorough ESD quality control and product safety.

General requirement User guide and Technical Report International Standard: IEC 61340-5-1/5-2 Electrostatics –  Protection of electronic devices from electrostatic phenomena

AES.4.3.2 ESD control items 

There are many ways to establish an ESD control program. A program can range from a very simple, low cost or basic system to a highly complex control program that uses a variety of control items that provide redundancy in the event that the primary ESD control element(s) were to fail. 

A basic ESD control program might include the following items:

a) A grounded work surface;

b) Personnel grounded through a wrist strap system;

c) ESD protective packaging to move ESDS from one process step to the next.


 A complex ESD control program might include the following items:

1) Grounded work surfaces;

2) Personnel grounded through constant wrist strap monitor;

3) Personnel grounded to a static control floor through ESD footwear;

4) Personnel wearing grounded ESD garments;

5) Air ionization at each workstation.

The decision to use a basic versus a complex ESD control program is a matter of company choice. Some of the considerations are: value of the products being manufactured, product reliability requirements imposed by the customer and the ESD sensitivity of the devices being handled. One type of program is not necessarily any better than the other as each can be effective in protecting ESD sensitive devices.

Once the ESD control items have been defined and implemented, the organization should develop an audit checklist. In order to establish meaningful data concerning improving or deteriorating ESD program trends, it is necessary for auditors to audit each area consistently every time. Many organizations find that properly designed checklists help improve audit consistency.

AES.5.3.1 Grounding/equipotential bonding systems

Figure 2– Schematic of an equipotential bonding system

Table 1 – Grounding/bonding requirements

AES.5.3.2 Personnel grounding

Table 2 – Personnel grounding requirements

AES.5.3.3 ESD protected areas (EPA)

Table 3 – EPA requirements

AES.5.3.4 Packaging

Table 4 – Packaging

AES.5.3.5 Marking    

International Standard: IEC 61340-5-1 Electrostatics    –  Part 5-1: Protection of electronic devices from electrostatic phenomena – General requirement.

Technical Report:       IEC/TR 61340-5-2 Electrostatics –  Part 5-2: Protection of electronic devices from electrostatic phenomena – User guide.

All ESD products fulfill the IEC 61340 standards.
We believe all the information in these pages including technical data to be reliable.
However we make no warranties expressed or implied and assume no liability regarding any use of this information.

سیستم همکاری در فروش کانال پروکسی تلگرام کاندوم اسپری تاخیری ایموشن proxy for telegram کسب درآمد کانال پروکسی تلگرام خرید کتاب سیستم های همکاری در فروش کانال سک30در تلگرام کسب درآمد از اینترنت کانال تلگرام دستگاه وکیوم مردانه