This Acrylic Static Dissipative (Conductive) paint Electroguard A40® is a water based paint . A40® paint Coatings will be fine for general light foot traffic. * Single Part Acrylic ESD Paint
* 2 coats recommended
* Coverage 10m² per litre * This coating requires Single Part Primer EM367
We offer two ESD paints, Electroguard E30 or Electroguard A40.
Electroguard E30 will give a more durable finish but A40 will be fine for general light foot traffic.
Both give the same colour, floor finish and ESD reading.
If the floor is bare concrete we would recommend the use of a Water Based Sealer/Primer first of all.
The key requirement is that the primer is WATER based, not solvent based.
If the floor is already painted and in good condition then you can simply paint over the current surface, see application details.
All ESD products fulfill the IEC 61340 standards. We believe all the information in these pages including technical data to be reliable. However we make no warranties expressed or implied and assume no liability regarding any use of this information.