Anti Static Electroguard A40® Acrylic Static Dissipative Paint | A40-7004 / 850-A40-7004 / ESDproducts

Anti-Static Floor Finish Electroguard A40® Acrylic ESD Paint Colour 7004 esdfloorcoatings ESDproducts EDSON
ESD

ESD Acrylic Static Dissipative Paint | Electroguard A40® | Colour 7004 | Light-Grey | 5 Litres

850-A40-7004
HS Code : 32099000
Brand

222,00 € exc tax

  Tell A Friend

This Acrylic Static Dissipative (Conductive) paint Electroguard A40® is water based paint. A40 Paint Coatings will be fine for general light foot traffic. * Single Part Acrylic ESD Paint * 2 coats recommended * Coverage 10m² per litreThis Acrylic Static Dissipative (Conductive) paint Electroguard A40® is a water based paint . A40® paint Coatings will be fine for general light foot traffic. * Single Part Acrylic ESD Paint *2 coats recommended *Coverage 10m² per litre * This coating requires Single Part Primer EM367

Also available 
[ Colour ]

We offer two ESD paints,  Electroguard E30 or Electroguard A40.
Electroguard E30 will give a more durable finish but A40 will be fine for general light foot traffic.
Both give the same colour, floor finish and ESD reading.

If the floor is bare concrete we would recommend the use of a Water Based Sealer/Primer first of all.
The key requirement is that the primer is WATER based, not solvent based.
If the floor is already painted and in good condition then you can simply paint over the current surface, see application details.

Paint Type
Electroguard A40®
Coverage:
10 m² Litre per coat (we recommend 2 coats)
Pack Size:
5 litres
Drying Time @ 20C:
Touch Dry 2 Hrs - Re-Coat at 8-10 Hrs - Full Cure 3 Days
Colour
Light Grey | RAL 7035
Colour Symbol
 
Mix Ratio:
Ready Mixed, do not thin
VOC Content:
60.5g/litre
Typical Thickness:
40 microns per coat, two thin layers. Do not over apply thickness
Thinner:
We do NOT recommend thinning this paint
Surface Resistance
10^5-10^8 Ohms/Square
Resistance to Ground:
10^5-10^8 Ohms/Square
Size
23 x 18 cm
Weight
6.2 Kg
Conforms to
IEC 61340-5-1/2
Charge Decay:
Conforms to MILB81705C
Composition
One component
Minimum Order Quantity
20 litres (4 tins)

All ESD products fulfill the IEC 61340 standards.
We believe all the information in these pages including technical data to be reliable. However we make no warranties expressed or implied and assume no liability regarding any use of this information.


کانال تلگرام سیستم همکاری در فروش کاندوم اسپری تاخیری ایموشن کانال پروکسی تلگرام کانال پروکسی تلگرام خرید پروکسی تلگرام سیستم های همکاری در فروش کسب درآمد بیت کوین