Copper Tape Earthing CTE / 850-CTE / ESDproducts

Copper Tape Earthing  (1m.  per 100 m² !!!) - CTE / 850-CTE / ESDproducts EDSON
ESD

Copper Tape Earthing (1 m. per 100 m² !!!)

850-CTE
HS Code : 39191099
Brand


  Tell A Friend

Copper Tape Earthing CTE / 850-CTE / ESDproducts. (1m. per 100 m² !!!) "Free of charge when ordering paint".

We offer two ESD paints,  Electroguard E30 or Electroguard A40.
Electroguard E30 will give a more durable finish but A40 will be fine for general light foot traffic.
Both give the same colour, floor finish and ESD reading.

If the floor is bare concrete we would recommend the use of a Water Based Sealer/Primer first of all.
The key requirement is that the primer is WATER based, not solvent based.
If the floor is already painted and in good condition then you can simply paint over the current surface, see application details.

All ESD products fulfill the IEC 61340 standards.
We believe all the information in these pages including technical data to be reliable. However we make no warranties expressed or implied and assume no liability regarding any use of this information.


کانال تلگرام سیستم همکاری در فروش کاندوم اسپری تاخیری ایموشن کانال پروکسی تلگرام کانال پروکسی تلگرام خرید پروکسی تلگرام سیستم های همکاری در فروش کسب درآمد بیت کوین